IMPLEMENTATION LEVEL

National

AFFECTED FLOW

Inflow

ANNOUNCED AS TEMPORARY

No

NON-TRADE-RELATED RATIONALE

No

ELIGIBLE FIRMS

all

JUMBO

No

TARIFF PEAK

No
← back to the state act
Inception date: 03 May 2017 | Removal date: open ended
Still in force

Public procurement localisation

The "Policy for providing preference to domestically manufactured iron & steel products in government procurement" was implemented on 3 May 2017. It establishes preferred procurement access for iron and steel products that satisfy a 15% minimum domestic value addition requirement. The requirement only concerns tenders for such products with a tender value exceeding INR 50 crore (appx. USD 7.8 million as on 12 May 2017). This requirement will be reviewed and adjusted according to the manufacturing capabilities of the industry.

Government procurement includes procurement by the Government of India, Public Sector Undertakings (PSUs), Societies, Trusts and Statutory bodies set by the government. The products procured by the government or its agencies can only be used for government projects and not for commercial resale directly or in any other form.

Only those iron and steel products for which at least one domestic manufacturer exists are covered under this policy. A committee of experts from the industry and the ministry will be set up to review and monitor the implementation of the policy. A waiver can be granted to a project from the requirement to source locally in case the specific grade of steel required is not manufactured in the country or in case the quantity demanded cannot be met through domestic sources. In case the government agencies are procuring iron and steel products not covered by the policy, they are required to notify the specifications of these products to the above committee

The products included in this policy are:

  1. Ductile iron pipe
  2. Wire rod & TMT bar
  3. Structural/sections
  4. Hot Rolled coils, strips, sheets & plates
  5. Hot Rolled universal/Quarto Plates
  6. Cot Rolled coils/strips
  7. Coated flat steel products/GP/GC sheets/AI-Zn coated
  8. Colour coated, painted sheets
  9. All kinds of steel pipes and tubes
  10. Seamless tubes & pipes
  11. Rails

AFFECTED COUNTRIES

MAP
TABLE
EXPORT

AFFECTED SECTORS AND PRODUCTS

411 Basic iron & steel
7224 Other alloy steel in ingots or other primary forms; semifinished products of other alloy steel.
722410 Ingots and other primary forms
722490 Other
412 Products of iron or steel
7208 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, hotrolled, not clad, plated or coated.
720825 Of a thickness of 4.75 mm or more
720826 Of a thickness of 3 mm or more but less than 4.75 mm
720827 Of a thickness of less than 3 mm
720836 Of a thickness exceeding 10 mm
720837 Of a thickness of 4.75 mm or more but not exceeding 10 mm
720838 Of a thickness of 3 mm or more but less than 4.75 mm
720839 Of a thickness of less than 3 mm
720851 Of a thickness exceeding 10 mm
720852 Of a thickness of 4.75 mm or more but not exceeding 10 mm
720854 Of a thickness of less than 3 mm
720890 Other
7209 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, coldrolled (coldreduced), not clad, plated or coated.
720915 Of a thickness of 3 mm or more
720916 Of a thickness exceeding 1 mm but less than 3 mm
720917 Of a thickness of 0.5 mm or more but not exceeding 1 mm
720918 Of a thickness of less than 0.5 mm
720926 Of a thickness exceeding 1 mm but less than 3 mm
720990 Other
7210 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated.
721011 Of a thickness of 0.5 mm or more
721012 Of a thickness of less than 0.5 mm
721030 Electrolytically plated or coated with zinc
721041 Corrugated
721049 Other
721050 Plated or coated with chromium oxides or with chromium and chromium oxides
721061 Plated or coated with aluminiumzinc alloys
721069 Other
721070 Painted, varnished or coated with plastics
721090 Other
7211 Flatrolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated.
721119 Other
721123 Containing by weight less than 0.25 % of carbon
721129 Other
721190 Other
7212 Flatrolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated.
721230 Otherwise plated or coated with zinc
721240 Painted, varnished or coated with plastics
721250 Otherwise plated or coated
7213 Bars and rods, hotrolled, in irregularly wound coils, of iron or nonalloy steel.
721320 Other, of freecutting steel
721391 Of circular crosssection measuring less than 14 mm in diameter
721399 Other
7214 Other bars and rods of iron or nonalloy steel, not further worked than forged, hotrolled, hotdrawn or hotextruded, but including those twisted after rolling.
721410 Forged
721420 Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
721499 Other
7215 Other bars and rods of iron or nonalloy steel.
721550 Other, not further worked than coldformed or coldfinished
721590 Other
7216 Angles, shapes and sections of iron or nonalloy steel.
721633 H sections
721640 L or T sections, not further worked than hotrolled, hotdrawn or extruded, of a height of 80 mm or more
721650 Other angles, shapes and sections, not further worked than hot rolled, hotdrawn or extruded
721691 Coldformed or coldfinished from flatrolled products
721699 Other
7217 Wire of iron or nonalloy steel.
721710 Not plated or coated, whether or not polished
721720 Plated or coated with zinc
721730 Plated or coated with other base metals
721790 Other
7220 Flatrolled products of stainless steel, of a width of less than 600 mm.
722012 Of a thickness of less than 4.75 mm
722020 Not further worked than coldrolled (coldreduced)
722090 Other
7221 Bars and rods, hotrolled, in irregularly wound coils, of stainless steel.
722100 Bars and rods, hotrolled, in irregularly wound coils, of stainless steel.
7222 Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.
722211 Of circular crosssection
722220 Bars and rods, not further worked than coldformed or coldfinished
722230 Other bars and rods
7223 Wire of stainless steel.
722300 Wire of stainless steel.
7225 Flatrolled products of other alloy steel, of a width of 600 mm or more.
722511 Grainoriented
722519 Other
722530 Other, not further worked than hotrolled, in coils
722540 Other, not further worked than hotrolled, not in coils
722550 Other, not further worked than coldrolled (coldreduced)
722591 Electrolytically plated or coated with zinc
722592 Otherwise plated or coated with zinc
722599 Other
7227 Bars and rods, hotrolled, in irregularly wound coils, of other alloy steel.
722710 Of high speed steel
722720 Of silicomanganese steel
722790 Other
7228 Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel.
722810 Bars and rods, of high speed steel
722820 Bars and rods, of silicomanganese steel
722830 Other bars and rods, not further worked than hotrolled, hotdrawn or extruded
722840 Other bars and rods, not further worked than forged
722850 Other bars and rods, not further worked than coldformed or cold finished
722860 Other bars and rods
722870 Angles, shapes and sections
722880 Hollow drill bars and rods
7229 Wire of other alloy steel.
722990 Other
7302 Railway or tramway track construction material of iron or steel, the following : rails, checkrails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (crossties), fishplates, chairs, chair wedges, sole plates
730210 Rails
7304 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.
730411 Of stainless steel
730419 Other
730423 Other drill pipe
730429 Other
730431 Colddrawn or coldrolled (coldreduced)
730439 Other
730441 Colddrawn or coldrolled (coldreduced)
730449 Other
730451 Colddrawn or coldrolled (coldreduced)
730459 Other
730490 Other
7305 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular crosssections, the external diameter of which exceeds 406.4 mm, of iron or steel.
730512 Other, longitudinally welded
730531 Longitudinally welded
730590 Other
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
730611 Welded, of stainless steel
730619 Other
730621 Welded, of stainless steel
730629 Other
730630 Other, welded, of circular crosssection, of iron or nonalloy steel
730640 Other, welded, of circular crosssection, of stainless steel
730650 Other, welded, of circular crosssection, of other alloy steel
730661 Of square or rectangular crosssection
730690 Other
7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel.
730711 Of nonmalleable cast iron
730719 Other
730721 Flanges
730723 Butt welding fittings
730729 Other
730791 Flanges
730792 Threaded elbows, bends and sleeves
730793 Butt welding fittings
730799 Other
421 Structural metal products & parts
7308 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridgesections, lockgates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors,
730810 Bridges and bridgesections
730820 Towers and lattice masts
730830 Doors, windows and their frames and thresholds for doors
730840 Equipment for scaffolding, shuttering, propping or pitpropping
730890 Other
429 Other fabricated metal products
7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated.
731210 Stranded wire, ropes and cables
731290 Other

Please report this page in case you detect an inaccuracy in its content.