IMPLEMENTATION LEVEL

National

AFFECTED FLOW

Inflow

ANNOUNCED AS TEMPORARY

No

NON-TRADE-RELATED RATIONALE

No

ELIGIBLE FIRMS

all

JUMBO

No

TARIFF PEAK

No
← back to the state act
Inception date: 30 May 2015 | Removal date: open ended
Still in force

Import tariff

 On 25 May 2015, the Indonesian Ministry of Finance announced in regulation 97/PMK.010/2015 import duty increases for the MFN rate on steel products with HS codes 7208-7217 and 7229 in the range of 5 to 10%. The changes for important steel products included:

  • for hot rolled coil/plate from 5% to 15%
  • cold rolled coil/sheet from 7.5 to 15%
  • for wire rod from 5% to 15%
  • for steel used for concrete reinforcement from 10% to 17.5
  • for zinc-coated steel sheets from 12.5 to 20%.

The regulation came into force on 30 May 2015.
Due to unavailability of trade volumes for 2014, the list of affected trading partners is based on data from 2013.

AFFECTED COUNTRIES

MAP
TABLE
EXPORT

AFFECTED SECTORS AND PRODUCTS

412 Products of iron or steel
7208 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, hotrolled, not clad, plated or coated.
720810 In coils, not further worked than hotrolled, with patterns in relief
720825 Of a thickness of 4.75 mm or more
720826 Of a thickness of 3 mm or more but less than 4.75 mm
720827 Of a thickness of less than 3 mm
720836 Of a thickness exceeding 10 mm
720837 Of a thickness of 4.75 mm or more but not exceeding 10 mm
720838 Of a thickness of 3 mm or more but less than 4.75 mm
720839 Of a thickness of less than 3 mm
720840 Not in coils, not further worked than hotrolled, with patterns in relief
720851 Of a thickness exceeding 10 mm
720852 Of a thickness of 4.75 mm or more but not exceeding 10 mm
720890 Other
7209 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, coldrolled (coldreduced), not clad, plated or coated.
720915 Of a thickness of 3 mm or more
720916 Of a thickness exceeding 1 mm but less than 3 mm
720917 Of a thickness of 0.5 mm or more but not exceeding 1 mm
720918 Of a thickness of less than 0.5 mm
720990 Other
7210 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated.
721011 Of a thickness of 0.5 mm or more
721012 Of a thickness of less than 0.5 mm
721020 Plated or coated with lead, including terneplate
721030 Electrolytically plated or coated with zinc
721049 Other
721050 Plated or coated with chromium oxides or with chromium and chromium oxides
721061 Plated or coated with aluminiumzinc alloys
721069 Other
721070 Painted, varnished or coated with plastics
721090 Other
7211 Flatrolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated.
721114 Other, of a thickness of 4.75 mm or more
721119 Other
721123 Containing by weight less than 0.25 % of carbon
721129 Other
7212 Flatrolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated.
721220 Electrolytically plated or coated with zinc
721230 Otherwise plated or coated with zinc
721240 Painted, varnished or coated with plastics
721250 Otherwise plated or coated
7213 Bars and rods, hotrolled, in irregularly wound coils, of iron or nonalloy steel.
721391 Of circular crosssection measuring less than 14 mm in diameter
721399 Other
7214 Other bars and rods of iron or nonalloy steel, not further worked than forged, hotrolled, hotdrawn or hotextruded, but including those twisted after rolling.
721410 Forged
721430 Other, of freecutting steel
721491 Of rectangular (other than square) crosssection
721499 Other
7215 Other bars and rods of iron or nonalloy steel.
721510 Of freecutting steel, not further worked than coldformed or cold finished
721550 Other, not further worked than coldformed or coldfinished
721590 Other
7216 Angles, shapes and sections of iron or nonalloy steel.
721610 U, I or H sections, not further worked than hotrolled, hotdrawn or extruded, of a height of less than 80 mm
721621 L sections
721631 U sections
721632 I sections
721633 H sections
721640 L or T sections, not further worked than hotrolled, hotdrawn or extruded, of a height of 80 mm or more
721650 Other angles, shapes and sections, not further worked than hot rolled, hotdrawn or extruded
721699 Other
7217 Wire of iron or nonalloy steel.
721710 Not plated or coated, whether or not polished
721720 Plated or coated with zinc
721730 Plated or coated with other base metals
7229 Wire of other alloy steel.
722920 Of silicomanganese steel
722990 Other

Please report this page in case you detect an inaccuracy in its content.