IMPLEMENTATION LEVEL

National

AFFECTED FLOW

Inflow

ANNOUNCED AS TEMPORARY

Yes

NON-TRADE-RELATED RATIONALE

No

ELIGIBLE FIRMS

all

JUMBO

No

TARIFF PEAK

No
← back to the state act
Inception date: 18 Feb 2009 | Removal date: 31 Dec 2016
Still in force

Import-related non-tariff measure, nes

The "Provisions on Iron and Steel Importation" (Decree of the Minister of Trade No 08/M-DAG/PER/2/2009), announced on 18 February 2009, which expires on 31 December 2010, introduces new procedures for the import of iron and steel as follows:
 

      i. Registration of importers with Indonesia's Ministry of Trade: Under the decree, iron and steel imports may only be imported by Registered Importers (IP) or Producer Importers (IT) of Steel or Iron. This status is valid for 1 year and may be extended;

      ii. Pre-shipment import technical verification: This must be done by an independent state-appointed surveyor at the loading port. The import technical verification shall cover the type of goods, classification of goods, quantity, and port of destination; and

      iii. Submission of quarterly reports on the realisation of imports: The written reports must be submitted to Director-General of the Ministry of Trade via
http://inatrade.depdag.go.id
    . Repeated failure to abide by this article shall result in the revocation of the Registered Importers (IP) or Producer Importers (IT) of Steel or Iron status.

The regulation applies to 202 domestically produced steel products including Hot Rolled Coil (HRC), Hot Rolled Plate (HRP), Layered Sheet Iron, Welding Pipes, Wire Rods, and Coated-Steel Products. Some items excluded from the verification and import technical tracking regulation are: 

      a. Steel or iron imported by licensed importers (IPs) of steel or iron in the automotive industry, electronics industry, ship dock industry and their relevant components;

      b. Steel or iron imported that is already subjected to import verification based on the User Specific Duty Free Scheme (USDFS/BM-DTP); and

      c. Steel or iron imported for the industrial needs in Free Trade Zones, Free Ports and Bonded Zones.


Update 13 September 2012:

The revised Decree 21/2009 eliminates the requirement to submit a Goods Import Plan in the application by an importer-producer (IP) or an importer (IL) for importation of iron and steel products. Furthermore it enlisted the industries excluded from the scope of the Decree:

  1. the industries of automotive, electronics, ship building, heavy equipment and their components;
  2. importers in Priority Lane: user industry with SKVI (Industry Verification Reference Letter) through USDFS (User-Specific Duty Free Scheme), and the company owning SKVI through BM-DTP (Import Duty Paid by the Government; and
  3. contractors of Joint Operations in Oil & Gas and Mining, of development of power plants for public consumption, and operators of the development of Oil & Gas downstream for public services.

Decrees 8/2009 and 21/2009 were extended for two more years by Decree 54/2010 until 31 December 2012.
On 1 March 2012, the Minister of Trade prolonged the regulation until 31 December 2015 (see regulation No. 08/M-DAG/PER/2/2012).

Update 2 - 23 December 2015:
On 23 December 2015, the Indonesian Ministry of Trade issued regulation 113/M-DAG/PER/12/2015 further prologning the initial provisions until 31 December 2016.

AFFECTED COUNTRIES

MAP
TABLE
EXPORT

AFFECTED SECTORS AND PRODUCTS

412 Products of iron or steel
7208 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, hotrolled, not clad, plated or coated.
720810 In coils, not further worked than hotrolled, with patterns in relief
720825 Of a thickness of 4.75 mm or more
720826 Of a thickness of 3 mm or more but less than 4.75 mm
720827 Of a thickness of less than 3 mm
720836 Of a thickness exceeding 10 mm
720837 Of a thickness of 4.75 mm or more but not exceeding 10 mm
720838 Of a thickness of 3 mm or more but less than 4.75 mm
720840 Not in coils, not further worked than hotrolled, with patterns in relief
720851 Of a thickness exceeding 10 mm
720852 Of a thickness of 4.75 mm or more but not exceeding 10 mm
720853 Of a thickness of 3 mm or more but less than 4.75 mm
720854 Of a thickness of less than 3 mm
720890 Other
7209 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, coldrolled (coldreduced), not clad, plated or coated.
720915 Of a thickness of 3 mm or more
720916 Of a thickness exceeding 1 mm but less than 3 mm
720917 Of a thickness of 0.5 mm or more but not exceeding 1 mm
720918 Of a thickness of less than 0.5 mm
720925 Of a thickness of 3 mm or more
720927 Of a thickness of 0.5 mm or more but not exceeding 1 mm
720928 Of a thickness of less than 0.5 mm
7210 Flatrolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated.
721011 Of a thickness of 0.5 mm or more
721012 Of a thickness of less than 0.5 mm
721020 Plated or coated with lead, including terneplate
721030 Electrolytically plated or coated with zinc
721049 Other
721050 Plated or coated with chromium oxides or with chromium and chromium oxides
721061 Plated or coated with aluminiumzinc alloys
721069 Other
721070 Painted, varnished or coated with plastics
721090 Other
7211 Flatrolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated.
721113 Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief
721114 Other, of a thickness of 4.75 mm or more
721119 Other
721123 Containing by weight less than 0.25 % of carbon
721129 Other
721190 Other
7213 Bars and rods, hotrolled, in irregularly wound coils, of iron or nonalloy steel.
721310 Containing indentations, ribs, grooves or other deformations produced during the rolling process
721320 Other, of freecutting steel
721391 Of circular crosssection measuring less than 14 mm in diameter
721399 Other
7214 Other bars and rods of iron or nonalloy steel, not further worked than forged, hotrolled, hotdrawn or hotextruded, but including those twisted after rolling.
721410 Forged
721420 Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
721491 Of rectangular (other than square) crosssection
721499 Other
7215 Other bars and rods of iron or nonalloy steel.
721510 Of freecutting steel, not further worked than coldformed or cold finished
721550 Other, not further worked than coldformed or coldfinished
721590 Other
7216 Angles, shapes and sections of iron or nonalloy steel.
721610 U, I or H sections, not further worked than hotrolled, hotdrawn or extruded, of a height of less than 80 mm
721621 L sections
721631 U sections
721632 I sections
721633 H sections
721640 L or T sections, not further worked than hotrolled, hotdrawn or extruded, of a height of 80 mm or more
721650 Other angles, shapes and sections, not further worked than hot rolled, hotdrawn or extruded
721669 Other
721699 Other
7217 Wire of iron or nonalloy steel.
721710 Not plated or coated, whether or not polished
721720 Plated or coated with zinc
721730 Plated or coated with other base metals
721790 Other
7219 Flatrolled products of stainless steel, of a width of 600 mm or more.
721912 Of a thickness of 4.75 mm or more but not exceeding 10 mm
721913 Of a thickness of 3 mm or more but less than 4.75 mm
721914 Of a thickness of less than 3 mm
721921 Of a thickness exceeding 10 mm
721922 Of a thickness of 4.75 mm or more but not exceeding 10 mm
721923 Of a thickness of 3 mm or more but less than 4.75 mm
721932 Of a thickness of 3 mm or more but less than 4.75 mm
721933 Of a thickness exceeding 1 mm but less than 3 mm
721934 Of a thickness of 0.5 mm or more but not exceeding 1 mm
721935 Of a thickness of less than 0.5 mm
721990 Other
7229 Wire of other alloy steel.
722920 Of silicomanganese steel
722990 Other
7301 Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel.
730110 Sheet piling
730120 Angles, shapes and sections
7304 Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.
730411 Of stainless steel
730419 Other
730422 Drill pipe of stainless steel
730423 Other drill pipe
730424 Other, of stainless steel
730429 Other
730431 Colddrawn or coldrolled (coldreduced)
730439 Other
730441 Colddrawn or coldrolled (coldreduced)
730449 Other
730451 Colddrawn or coldrolled (coldreduced)
730459 Other
730490 Other
7305 Other tubes and pipes (for example, welded, riveted or similarly closed), having circular crosssections, the external diameter of which exceeds 406.4 mm, of iron or steel.
730511 Longitudinally submerged arc welded
730512 Other, longitudinally welded
730519 Other
730520 Casing of a kind used in drilling for oil or gas
730531 Longitudinally welded
730539 Other
730590 Other
7306 Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
730611 Welded, of stainless steel
730619 Other
730629 Other
730630 Other, welded, of circular crosssection, of iron or nonalloy steel
730640 Other, welded, of circular crosssection, of stainless steel
730650 Other, welded, of circular crosssection, of other alloy steel
730661 Of square or rectangular crosssection
730690 Other
7307 Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel.
730719 Other
730721 Flanges
730722 Threaded elbows, bends and sleeves
730723 Butt welding fittings
730729 Other
730791 Flanges
730792 Threaded elbows, bends and sleeves
730793 Butt welding fittings
730799 Other
421 Structural metal products & parts
7308 Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridgesections, lockgates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors,
730810 Bridges and bridgesections
730820 Towers and lattice masts
730830 Doors, windows and their frames and thresholds for doors
730840 Equipment for scaffolding, shuttering, propping or pitpropping
730890 Other
422 Tanks, reservoirs & containers of iron, steel or aluminium
7311 Containers for compressed or liquefied gas, of iron or steel.
731100 Containers for compressed or liquefied gas, of iron or steel.
429 Other fabricated metal products
7312 Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated.
731210 Stranded wire, ropes and cables
731290 Other
7314 Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel.
731419 Other
731420 Grill, netting and fencing, welded at the intersection, of wire with a maximum crosssectional dimension of 3 mm or more and having a mesh size of 100 cm² or more
731431 Plated or coated with zinc
731439 Other
731441 Plated or coated with zinc
731449 Other
7317 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper.
731700 Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper.
7318 Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotterpins, washers (including spring washers) and similar articles, of iron or steel.
731812 Other wood screws
731814 Selftapping screws
731815 Other screws and bolts, whether or not with their nuts or washers
731819 Other
731821 Spring washers and other lock washers
731822 Other washers
731823 Rivets
731824 Cotters and cotterpins
731829 Other
448 Domestic appliances & parts
7321 Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gasrings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel.
732111 For gas fuel or for both gas and other fuels
732190 Parts

Please report this page in case you detect an inaccuracy in its content.